Tuesday, May 5, 2020

Tensile test of aluminum and mild steel free essay sample

ABSTARCT: Tensile tests are fundamental for understanding properties of different materials, and how they will behave under load. These properties can be used for design and analysis of engineering structures, and for developing new Materials that better suit a specified use. This lab tested two materials mild steel and cast iron. The data from each test was used to determine valuable material properties such as ultimate tensile strength, modulus of elasticity, and yield strength. Other calculated properties included true fracture strength, percent reduction of area, and percent elongation. These material properties were used to define the material as brittle or ductile. INTRODUCTION: Mechanical testing plays an important role in evaluating fundamental properties of engineering materials as well as in developing new materials and in controlling the quality of materials for use in design and construction. If a material is to be used as part of an engineering structure that will be subjected to a load, it is important to know that the material is strong enough and rigid enough to withstand the loads that it will experience in service. As a result engineers have developed a number of experimental techniques for mechanical testing of engineering materials subjected to tension, compression, bending or torsion loading. The most common type of test used to measure the mechanical properties of a material is the Tension Test. Tension test is widely used to provide a basic design information on the strength of materials and is an acceptance test for the specification of materials. The major parameters that describe the stress-strain curve obtained during the tension test are the tensile strength (UTS), yield strength or yield point (ÏÆ'y), elastic modulus (E), percent elongation (∆L%) and the reduction in area (RA%). Toughness, Resilience, Poisson’s ratio(ÃŽ ½ ) can also be found by the use of this testing technique. In this test, a specimen is prepared suitable for gripping into the jaws of the testing machine type that will be used. The specimen used is approximately uniform over a gage length (the length within which elongation measurements are done). Tensile specimens are machined from the material to be tested in the desired orientation and according to the standards. The cross section of the specimen is usually round, square or rectangular. For metals, a piece of sufficient thickness can be obtained so that it can be easily machined, a round specimen is commonly used. For sheet and plate stock, a flat specimen is usually employed. The change in the gage length of the sample as pulling proceeds is measured from either the change in actuator position (stroke or overall change in length) or a sensor attached to the sample (called an extensometer). A tensile load is applied to the specimen until it fractures. During the test, the load required to make a certain elongation on the material is recorded. A load elongation curve is plotted by an x-y recorder, so that the tensile behavior of the material can be obtained. An engineering stress-strain curve can be constructed from this load-elongation curve by making the required calculations. Then the mechanical parameters that we search for can be found by studying on this curve. Engineering Stress is obtained by dividing the load by the original area of the cross section of the specimen. Stress ÏÆ' = P/Ao ( Load/Initial cross-sectional area) Strain = e = ∆l/lo (Elongation/Initial gage length) Engineering stress and strain are independent of the geometry of the specimen. ELASTIC REGION: The part of the stress-strain curve up to the yielding point.Elastic deformation is recoverable. In the elastic region, stress and strain are related to each other linearly. Hooke’s Law: ÏÆ' = Ee The linearity constant E is called the elastic modulus which is specific foreach type of material. Yield Strength is the stress level at which plastic deformation starts. The beginning of first plastic deformation is called yielding. It is an important parameter in design. The stress at which plastic deformation or yielding is observed to begin depends on the sensitivity of the strain measurements. With most materials there is a gradual transition from elastic to plastic behavior, and the point at which plastic deformation begins is hard to define with precision. Various criteria for thevinitiation of yielding are used depending on the sensitivity of the strain measurements and the intended use of the data. 0,2% off-set method is a commonly used method to determine the yield stength. ÏÆ'y(0.2%) is found by drawing a parallel line to the elastic region and the point at which this line intersects with the stressstrain curve is set as the yielding point. An illustration of 0,2% off-set method is shown in the appendix part. Plastic Region: The part of the stress-strain diagram after the yielding point. At the yielding point, the plastic deformation starts. Plastic deformation is permanent. At the maximum point of the stress-strain diagram (ÏÆ' UTS), necking starts. Tensile Strength is the maximum stress that the material can support. ÏÆ'UTS = Pmax/Ao Because the tensile strength is easy to determine and is a quite reproducible property, it is useful for the purposes of specifications and for quality control of a product. Extensive empirical correlations between tensile strength and properties such as hardness and fatigue strength are often quite useful. For brittle materials, the tensile strength is a valid criterion for design. Ductility is the degree of plastic deformation that a material can withstand before fracture. A material that experiences very little or no plastic deformation upon fracture is termed brittle. In general, measurements of ductility are of interest in three ways: 1. To indicate the extent to which  a metal can be deformed without fracture in metalworking operations such as rolling and extrusion. 2. To indicate to the designer, in a general way, the ability of the metal to flow plastically before fracture. 3. To serve as an indicator of changes in impurity level or processing conditions. Ductility measurements may be specified to assess material

Tuesday, April 14, 2020

Benefits From Using CMS Format Essay Sample

Benefits From Using CMS Format Essay SampleYou might have heard of CMS format essay sample. It is an excellent way to get some useful information on how to write a CMS format essay. The best part is that it can help you learn the content management system in no time. But, you should not just jump into writing a CMS format essay, instead, you should read and think about the concepts.CMS stands for Content Management System. It is a web application used to publish, manage, and update content on the World Wide Web. It is also known as Content Management System, or Content Management System. When CMS format essay sample was invented, it aimed to make it easier for everyone to post a piece of text online. The purpose of this application is to give control over the design, layout, and other aspects of a web page, to those who are authorized by the company.You will find many benefits from using CMS, and if you use it, you can easily get to the top of the rankings of search engines. And you don't have to know much about HTML or web programming. All you need to know is how to utilize web-based applications and technologies to post information to the World Wide Web.It is a good option for those who don't want to learn about different types of languages and the process of learning them. They can simply focus on learning the features of CMS format essay sample. The features that are offered by CMS are mentioned in various CMS format essay sample examples. These features can be put to use right away. There is no need to worry that you will not be able to use the features.One of the main benefits is that you can use your word processing applications on your website. You can simply upload documents and run a static HTML with the help of the application. Thisis important because a CMS format essay sample allows you to save your document on the computer and you can still edit it later on.The final benefit is that you can save time. Since your CMS will make it easy for you to cr eate a blog, you won't have to do much work. You only have to change some details in the template and you can start to make posts on your blog.As you know, you can find many CMS format essay sample at different places. This is one of the reasons why CMS format essay sample is becoming popular. So, it is recommended to go online to find some blogs where you can learn the things from.You can use CMS format essay sample as a guide to get familiar with the features of CMS. It is an excellent way to learn new things, as well as save time. When you have all the facts, you can get started immediately.

Digital Crime Scenario

Wednesday, March 11, 2020

General Educations Writing Essay Example

General Educations Writing Essay Example General Educations Writing Essay General Educations Writing Essay Written Communications is one of my weaknesses because I have a hard time learning how to compose works that apply the correct structures of a composition which Is coherent paragraphing, Intelligible sentence structure, precise and varied word choice, and correcting spelling, grammar, and mechanics. I have always have problems In this area in school because I didnt know express myself clear In my written and If it was a boring topic It was hard for me to write about because It was meeting that was not interesting to me. I plan to work on this area In the future by asking my teachers for help and guidance with my writing. This will Impact my success In college because I would be able to analyze and Interpret college level materials without any Issues. Oral communicating would be the second weaknesses because I have a hard time learning how to understand information in different verbal and nonverbal messages. Again this was something I struggled with as a child because I didnt like doing presentation in front my class so I would not do it because I was shy to speak in front of people and felt like it was putting on the spot light. I plan to work on this area in the future by noting letting my pride get in the way of me doing what I got to do when comes to doing presentations in front of people. This will impact my success in college I will be more confident to do my work. : Last area I would consider a weakness would be Critical Thinking and Problem Solving because I dont use appropriate problem solving method when I get mad. It is hard for me to control my anger and deal with certain situation professional. So what I have learned to go is Just walk away I find that to help well. I plan to work on this area in the future by not letting people get to me and try to think before I act. This will impact my success in college by being the bigger person in certain situations.

Monday, February 24, 2020

Contingent Workforce Planning at Motorola, Inc Case Study

Contingent Workforce Planning at Motorola, Inc - Case Study Example It is evidently clear from the discussion that a company where contingent workers are responsible for the usual staff and form inter-corporate culture comes up. This significantly results in increased activity and contingent labor influence, which leads to the insecurity of the employment relationship. Despite the Motorola is an international company working in more than 70 countries worldwide, it is affected by the same human resource problems. The modern companies use contingent workers. Initially, the company’s human resource system was based on the transactional relationships between different staffing and recruiting firms. The firms were responsible for the staff selection and making contracts in the market. Consequently, this approach had many problems that related to a lack of coordination and staff management. There was also a lack of common corporate contingent labor plan sourcing, a disparity between the contingent workers pay rate and that of the company’s fu ll-time workers and high costs of sourcing. Among the Motorola Company’s problems, there are two main ones: the first one is associated with the company’s business activities cycle. This required a certain degree of flexibility of the staff’s number. The second problem relates to the high cost of the previous staff recruitment scheme, which involved a great number of staffing companies and agencies. There are some facts that affect the problems and issues at the Motorola Company. Recruitment of contingent employees is a modern tendency in big companies and Motorola is a no exception. The trend of hiring temporary workers has reasons, and as earlier mentioned, this trend is due to the cynical nature of the industry. This requires the flexibility of staffing.

Saturday, February 8, 2020

Data Warehouse Design and Implementation Research Paper

Data Warehouse Design and Implementation - Research Paper Example Additionally, the online analytical processing systems offer a technique to produce ad-hoc queries beside the data-warehouse in an attempt to respond to significant business questions. In the same way, data mining offers a wide variety of techniques and algorithms for finding knowledge in a huge bulk of corporate data. In addition, in order to develop a data warehouse system, we need to put into operation a reliable technology structure where corporate operational data can be managed effectively with real and enterprise-wide aspects and to get into reorganization of a handful application policies to offer a high quality system. However, the implementation and design of a data warehouse system has occasionally been a very big challenge in theory as well as in practice (Charles, 2010; Turban, Leidner, McLean, & Wetherbe, 2005; Olamendy, 2010). This paper discusses some of the important aspects related to the design and implementation of a data warehouse system. The basic purpose of thi s research is to investigate some of the important aspects such as theories, initiatives, models and techniques for better and improved data warehouse system design and implementations. Introduction A data warehouse is normally recognized as an integrated and time-varying set of information and data that is basically used for strategic decision making through OLAP (online analytical processing) methods. ... this perspective, however hardly any technique exists to date for applying similar methods from an operational database (Charles, 2010; Husemann, Lechtenborger, & Vossen, 2000; Laudon & Laudon, 1999; Inmon, 2002). Without a doubt, there are many standards and methods to implement and design a relational data model for a business system which are flexible to design and implement data warehouse technology based modeling, however they cannot be employed as a natural method, consequently data warehouse development modeling is novel regulation that is improving with the passage of time. Basically, the starting point for the design and development of the data-warehouse environment is the data model. In absence data model, the implementation of a data warehouse is almost impossible. In this scenario, the data model works like a roadmap for technology based system development (Charles, 2010; Husemann, Lechtenborger, & Vossen, 2000; Laudon & Laudon, 1999; Inmon, 2002). Moreover, in order to d evelop a data warehouse system, we need to form a reliable technology based environment where organization’s operational data will be maintained effectively in an enterprise and integrated view and to get into recognition a handful accomplishment policy to offer a high quality system. However, the implementation and design of a data warehouse system frequently is a very complex issue in theory as well as practice (Charles, 2010). This paper will present a detailed analysis of data warehouse design and implementation. This research will cover some of the major aspects that need to be considered while designing implementing models of the data warehouse. Data Warehouse Design This section discusses some of the approaches and methods those can be adopted for the data warehouse design which

Wednesday, January 29, 2020

School Safety Essay Example for Free

School Safety Essay In the last decade, school violence cases have drastically increased. Between 1997 and 1999, there was a rash of school shootings, the most notable occurring at West Paducah, Jonesboro, and Columbine. These examples are just a few instances in the long list of tragedy that occurs in the school setting. There is a broad spectrum of school violence and misconduct that keep school officials on alert: handbook violations, drug use, harassment, bullying, fighting and school shootings. With school violence on the increase, administrators are forced to re-evaluate school policies to ensure safety and security for the students and staff members. The National Education Association (NEA) supports policies developed by states, districts and schools to effectively address bullying and harassment that lead to school violence (NEA, 2002-2010). Although some officials feel that a zero-tolerance stance is the most effective means to combating bullying and harassment in the school setting, the NEA takes the position of educating school officials, parents, community members, and students on the effects of bullying and harassment. In an attempt to reduce bullying and harassment, the NEA works to promote school safety by presenting strategies to â€Å"reduce and eliminate bullying and harassment; expand access to counseling, anger management and peer mediation; provide ways for students to communicate with adults about rumors and threats; and develop instruction that teaches values like respect and responsibility† (NEA, 2002-2010). The school environment is one of the safest environments for children today. Students should feel comfortable coming to school and should be allowed to learn in an environment free for intimidation and fear. The NEA agrees with this statement and supports legislation requiring states, districts, and schools to adopt plans to prevent and respond to bullying and harassment incidents. References NEA. (2002-2010). School safety. Retrieved from http://www.nea.org/home/16364.htm